דילוג לניווט ראשי דילוג לחיפוש דילוג לתוכן הראשי

Study and test of the rebuncher for SARAF-LINAC phase II

  • Lu Zhao
  • , Xiao Wen Zhu
  • , Jonathan Dumas
  • , Didier Chirpaz
  • , Tom Joannem
  • , Francis Gohier
  • , Nicolas Solenne
  • , Patrice Guiho
  • , Remy Braud
  • , Olivier Piquet
  • , Guillaume Ferrand
  • , Sébastien Ladegaillerie
  • , Claude Marchand
  • , Francoise Gougnaud
  • , Romuald Duperrier
  • , Didier Uriot
  • , Leo Weissman
  • , Boaz Kaizer
  • , Eli Farber
  • , Matthieu Michel
  • Jean Francois Leyge

פרסום מחקרי: פרסום בכתב עתמאמרביקורת עמיתים

2 ציטוטים ‏(Scopus)

תקציר

In order to match the beam exiting the RFQ to the superconducting cavities and to minimize the longitudinal beam extension, three rebunchers will be installed in the Medium Energy Beam Transport (MEBT) of SARAF-LINAC phase II. CEA is in charge of the design and fabrication of the copper-plated stainless steel, 3-gap rebunchers. Beam dynamic simulation leads to the global MEBT design. The rebuncher was successfully conditioned to the RF power of 4.4 kW required for CW operation, with sufficient power margin. A solid state power amplifier of 10 kW developed by SNRC is used during the RF test. The rebuncher shows a good performance in terms of the dissipated power, peak temperatures and vacuum level.

שפה מקוריתאנגלית
מספר המאמר164716
כתב עתNuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
כרך986
מזהי עצם דיגיטלי (DOIs)
סטטוס פרסוםפורסם - 11 ינו׳ 2021

טביעת אצבע

להלן מוצגים תחומי המחקר של הפרסום 'Study and test of the rebuncher for SARAF-LINAC phase II'. יחד הם יוצרים טביעת אצבע ייחודית.

פורמט ציטוט ביבליוגרפי