Microhardness analysis of diamond like carbon films

E. Rabinovitch, A. Axelevitch, G. Golan, L. Klibanov, N. Croitoru, A. Seidman

פרסום מחקרי: תוצר מחקר מכנסהרצאהביקורת עמיתים

1 ציטוט ‏(Scopus)

תקציר

Microhardness analysis of Diamond-Like Carbon (DLC) films deposited by PECVD, using R.F. generator was carried out. This analysis was realized by a standard tester PMT-3 which consists of a flat field optical microscope and a diamond stylus probe. Vickers indentation measurements were done with constant loads of: 10 g, 20 g, 30 g, 50 g, 60 g and 70 g in a continuous pressure. It was shown that microhardness results of the DLC thin films are strongly dependent on the methodological principles of the measurement technique and instrumentation. An iterations method was used in order to choose the correct load value. Every loading was accompanied with a metallographical control of the indentor's stamps quality. Best results were obtained for 10 g, 20 g and 30 g loads. The analysis is based on the empirical approach and the 'cavity model' of the indentation hardness.

שפה מקוריתאנגלית
עמודים452-455
מספר עמודים4
סטטוס פרסוםפורסם - 1996
פורסם באופן חיצוניכן
אירועProceedings of the 1996 19th Convention of Electrical and Electronics Engineers in Israel - Jerusalem, Isr
משך הזמן: 5 נוב׳ 19966 נוב׳ 1996

כנס

כנסProceedings of the 1996 19th Convention of Electrical and Electronics Engineers in Israel
עירJerusalem, Isr
תקופה5/11/966/11/96

טביעת אצבע

להלן מוצגים תחומי המחקר של הפרסום 'Microhardness analysis of diamond like carbon films'. יחד הם יוצרים טביעת אצבע ייחודית.

פורמט ציטוט ביבליוגרפי