Study of Al-Si alloy oxygen saturation on its microstructure and mechanical properties

Arkady Finkelstein, Arseny Schaefer, Olga Chikova, Konstantin Borodianskiy

Research output: Contribution to journalArticlepeer-review

9 Scopus citations

Abstract

One of the main goals of modern materials research is obtaining different microstructures and studying their influence on the mechanical properties of metals; aluminum alloys are particularly of interest due to their advanced performance. Traditionally, their required properties are obtained by alloying process, modification, or physical influence during solidification. The present work describes a saturation of the overheated AlSi7Fe1 casting alloy by oxides using oxygen blowing approach in overheated alloy. Changes in metals' microstructural and mechanical properties are also described in the work. An Al10SiFe intermetallic complex compound was obtained as a preferable component to Al2O3 precipitation on it, and its morphology was investigated by scanning electron microscopy. The mechanical properties of the alloy after the oxygen blowing treatment are discussed in this work.

Original languageEnglish
Article number786
JournalMaterials
Volume10
Issue number7
DOIs
StatePublished - 11 Jul 2017

Keywords

  • Aluminum alloy
  • Aluminum oxides
  • Modification
  • Oxygen blowing

Fingerprint

Dive into the research topics of 'Study of Al-Si alloy oxygen saturation on its microstructure and mechanical properties'. Together they form a unique fingerprint.

Cite this