Sintering BFO targets for RF sputtering

G. Orr; A. Goryachev; G. Golan

doi:10.34049/bcc.52.C.0047

Sintering BFO targets for RF sputtering

G. Orr, A. Goryachev, G. Golan

Department of Electrical and Electronics Engineering

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

Ceramic BiFeO3 samples were prepared by rapid sintering at 880^◦C. Two compositions were examined. A 56/44 Bi2O3/Fe2O3 mole% composition and a 56Bi2O3 44Fe2O3 + 6.5wt% NaCl composition. The samples were heat treated at different times up to 8 minutes and the phase content was examined as a function of the time using XRD measurements and analysis. It was demonstrated that using both compositions, maximum BiFeO3 phase content is obtained after 3.5 minutes. In the former approximately 50% of the material transformed to BiFeO3 while in the latter 98.5%.

Original language	English
Pages (from-to)	40-45
Number of pages	6
Journal	Bulgarian Chemical Communications
Volume	52
DOIs	https://doi.org/10.34049/bcc.52.C.0047
State	Published - 2020

Keywords

BFO
Multiferroic
Photovoltaic
Sputtering

Access to Document

10.34049/bcc.52.C.0047

Cite this

@article{b5d0fb54c2564c1ea04d5e00255e2e98,

title = "Sintering BFO targets for RF sputtering",

abstract = "Ceramic BiFeO3 samples were prepared by rapid sintering at 880◦C. Two compositions were examined. A 56/44 Bi2O3/Fe2O3 mole% composition and a 56Bi2O3 44Fe2O3 + 6.5wt% NaCl composition. The samples were heat treated at different times up to 8 minutes and the phase content was examined as a function of the time using XRD measurements and analysis. It was demonstrated that using both compositions, maximum BiFeO3 phase content is obtained after 3.5 minutes. In the former approximately 50% of the material transformed to BiFeO3 while in the latter 98.5%.",

keywords = "BFO, Multiferroic, Photovoltaic, Sputtering",

author = "G. Orr and A. Goryachev and G. Golan",

note = "Publisher Copyright: {\textcopyright} 2020 Bulgarian Academy of Sciences",

year = "2020",

doi = "10.34049/bcc.52.C.0047",

language = "אנגלית",

volume = "52",

pages = "40--45",

journal = "Bulgarian Chemical Communications",

issn = "0861-9808",

publisher = "Bulgarian Academy of Sciences",

}

TY - JOUR

T1 - Sintering BFO targets for RF sputtering

AU - Orr, G.

AU - Goryachev, A.

AU - Golan, G.

PY - 2020

Y1 - 2020

N2 - Ceramic BiFeO3 samples were prepared by rapid sintering at 880◦C. Two compositions were examined. A 56/44 Bi2O3/Fe2O3 mole% composition and a 56Bi2O3 44Fe2O3 + 6.5wt% NaCl composition. The samples were heat treated at different times up to 8 minutes and the phase content was examined as a function of the time using XRD measurements and analysis. It was demonstrated that using both compositions, maximum BiFeO3 phase content is obtained after 3.5 minutes. In the former approximately 50% of the material transformed to BiFeO3 while in the latter 98.5%.

AB - Ceramic BiFeO3 samples were prepared by rapid sintering at 880◦C. Two compositions were examined. A 56/44 Bi2O3/Fe2O3 mole% composition and a 56Bi2O3 44Fe2O3 + 6.5wt% NaCl composition. The samples were heat treated at different times up to 8 minutes and the phase content was examined as a function of the time using XRD measurements and analysis. It was demonstrated that using both compositions, maximum BiFeO3 phase content is obtained after 3.5 minutes. In the former approximately 50% of the material transformed to BiFeO3 while in the latter 98.5%.

KW - BFO

KW - Multiferroic

KW - Photovoltaic

KW - Sputtering

UR - http://www.scopus.com/inward/record.url?scp=85101750487&partnerID=8YFLogxK

U2 - 10.34049/bcc.52.C.0047

DO - 10.34049/bcc.52.C.0047

M3 - ???researchoutput.researchoutputtypes.contributiontojournal.article???

AN - SCOPUS:85101750487

SN - 0861-9808

VL - 52

SP - 40

EP - 45

JO - Bulgarian Chemical Communications

JF - Bulgarian Chemical Communications

ER -

Sintering BFO targets for RF sputtering

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this