Skip to main navigation Skip to search Skip to main content

Porosity, lamellar microstructure, and their effect on the mechanical and corrosion behavior of Ti-6Al-7Nb alloy produced by directed energy deposition

  • Vladimir Popov
  • , Abheepsit Raturi
  • , Inbar Sommer
  • , Lynn Cohen
  • , Eyal Sabatani
  • , Shir Andreev Batat
  • , Ankit Thakur
  • , Noam Eliaz

Research output: Contribution to journal › Article › peer-review

Abstract

Directed energy deposition (DED) of Ti-6Al-7Nb was systematically investigated to elucidate the influence of additive manufacturing (AM)-induced micro-porosity and resulting as-built lamellar microstructure on controlling its hardness, tensile properties, and corrosion resistance. The samples were produced using different combinations of scanning pattern, laser power (450, 725 and 1000 W), scan speed (600, 800, and 1000 mm/min), and powder mass flow rate (4, 5.5, and 7 g/min). Archimedes-based bulk density measurements indicated high relative density (>97%) in all samples, whereas detailed micro-computed tomography revealed significant variations in micro-defect population. A strong correlation was found between pore density and process parameters. The as-built alloy exhibited a fine lamellar α+β microstructure typical of rapid solidification. Electron backscatter diffraction (EBSD) analysis showed that refinement of α-lamellae thickness by approximately 50% resulted in increased hardness, establishing a direct microstructure–property relationship. Electrochemical testing in simulated body fluids demonstrated excellent corrosion resistance and immunity to pitting, with improved corrosion potential observed in nearly defect-free material. These results demonstrate that micro-porosity and lamellar refinement govern the functional performance of directed energy deposited Ti-6Al-7Nb.

Original languageEnglish
Article number190104
JournalJournal of Alloys and Compounds
Volume1079
DOIs
StatePublished - 15 Aug 2026
Externally publishedYes

Keywords

  • Additive manufacturing
  • Biomaterial
  • Directed energy deposition (DED)
  • Microporosity
  • Ti-6Al-7Nb
  • Titanium alloys

Fingerprint

Dive into the research topics of 'Porosity, lamellar microstructure, and their effect on the mechanical and corrosion behavior of Ti-6Al-7Nb alloy produced by directed energy deposition'. Together they form a unique fingerprint.

Cite this