Improvement of the electro-optical process in GaAs for terahertz single pulse detection by using a fiber-coupling system

Adnan Haj Yahya; Nezah Balal; Avi Klein; Jacob Gerasimov; Aharon Friedman

doi:10.3390/app11156859

Improvement of the electro-optical process in GaAs for terahertz single pulse detection by using a fiber-coupling system

Adnan Haj Yahya, Nezah Balal, Avi Klein, Jacob Gerasimov, Aharon Friedman

Department of Electrical and Electronics Engineering

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

The electro-optical process is a popular method for terahertz radiation detection. Detectors based on the electro-optical process have large bandwidth, and the signal-to-noise ratio (SNR) is relatively high. Further, this detector can be applied to detect high-power signals without using radiation attenuation. This paper presents a method to improve the electro-optic process to THz radiation detection based on GaAs crystals by coupling the optical output signal into fiber. Results demonstrated an improvement in the signal-to-noise ratio that means an increase in the dynamic range of the electro-optical detector.

Original language	English
Article number	6859
Journal	Applied Sciences (Switzerland)
Volume	11
Issue number	15
DOIs	https://doi.org/10.3390/app11156859
State	Published - 1 Aug 2021

Keywords

Cross-polarization
Electro-optic detection
Fiber-coupling
GaAs crystal
THz pulse

Access to Document

10.3390/app11156859

Cite this

@article{d94e060589ab40c7b41abb80ff6413eb,

title = "Improvement of the electro-optical process in GaAs for terahertz single pulse detection by using a fiber-coupling system",

abstract = "The electro-optical process is a popular method for terahertz radiation detection. Detectors based on the electro-optical process have large bandwidth, and the signal-to-noise ratio (SNR) is relatively high. Further, this detector can be applied to detect high-power signals without using radiation attenuation. This paper presents a method to improve the electro-optic process to THz radiation detection based on GaAs crystals by coupling the optical output signal into fiber. Results demonstrated an improvement in the signal-to-noise ratio that means an increase in the dynamic range of the electro-optical detector.",

keywords = "Cross-polarization, Electro-optic detection, Fiber-coupling, GaAs crystal, THz pulse",

author = "Yahya, \{Adnan Haj\} and Nezah Balal and Avi Klein and Jacob Gerasimov and Aharon Friedman",

note = "Publisher Copyright: {\textcopyright} 2021 by the authors. Licensee MDPI, Basel, Switzerland.",

year = "2021",

month = aug,

day = "1",

doi = "10.3390/app11156859",

language = "אנגלית",

volume = "11",

journal = "Applied Sciences (Switzerland)",

issn = "2076-3417",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "15",

}

TY - JOUR

T1 - Improvement of the electro-optical process in GaAs for terahertz single pulse detection by using a fiber-coupling system

AU - Yahya, Adnan Haj

AU - Balal, Nezah

AU - Klein, Avi

AU - Gerasimov, Jacob

AU - Friedman, Aharon

PY - 2021/8/1

Y1 - 2021/8/1

N2 - The electro-optical process is a popular method for terahertz radiation detection. Detectors based on the electro-optical process have large bandwidth, and the signal-to-noise ratio (SNR) is relatively high. Further, this detector can be applied to detect high-power signals without using radiation attenuation. This paper presents a method to improve the electro-optic process to THz radiation detection based on GaAs crystals by coupling the optical output signal into fiber. Results demonstrated an improvement in the signal-to-noise ratio that means an increase in the dynamic range of the electro-optical detector.

AB - The electro-optical process is a popular method for terahertz radiation detection. Detectors based on the electro-optical process have large bandwidth, and the signal-to-noise ratio (SNR) is relatively high. Further, this detector can be applied to detect high-power signals without using radiation attenuation. This paper presents a method to improve the electro-optic process to THz radiation detection based on GaAs crystals by coupling the optical output signal into fiber. Results demonstrated an improvement in the signal-to-noise ratio that means an increase in the dynamic range of the electro-optical detector.

KW - Cross-polarization

KW - Electro-optic detection

KW - Fiber-coupling

KW - GaAs crystal

KW - THz pulse

UR - https://www.scopus.com/pages/publications/85111704864

U2 - 10.3390/app11156859

DO - 10.3390/app11156859

M3 - ???researchoutput.researchoutputtypes.contributiontojournal.article???

AN - SCOPUS:85111704864

SN - 2076-3417

VL - 11

JO - Applied Sciences (Switzerland)

JF - Applied Sciences (Switzerland)

IS - 15

M1 - 6859

ER -

Improvement of the electro-optical process in GaAs for terahertz single pulse detection by using a fiber-coupling system

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this