تخطي إلى التنقل الرئيسي تخطي إلى البحث تخطي إلى المحتوى الرئيسي

Porosity, lamellar microstructure, and their effect on the mechanical and corrosion behavior of Ti-6Al-7Nb alloy produced by directed energy deposition

  • Vladimir Popov
  • , Abheepsit Raturi
  • , Inbar Sommer
  • , Lynn Cohen
  • , Eyal Sabatani
  • , Shir Andreev Batat
  • , Ankit Thakur
  • , Noam Eliaz

نتاج البحث: نشر في مجلة › مقالة › مراجعة النظراء

ملخص

Directed energy deposition (DED) of Ti-6Al-7Nb was systematically investigated to elucidate the influence of additive manufacturing (AM)-induced micro-porosity and resulting as-built lamellar microstructure on controlling its hardness, tensile properties, and corrosion resistance. The samples were produced using different combinations of scanning pattern, laser power (450, 725 and 1000 W), scan speed (600, 800, and 1000 mm/min), and powder mass flow rate (4, 5.5, and 7 g/min). Archimedes-based bulk density measurements indicated high relative density (>97%) in all samples, whereas detailed micro-computed tomography revealed significant variations in micro-defect population. A strong correlation was found between pore density and process parameters. The as-built alloy exhibited a fine lamellar α+β microstructure typical of rapid solidification. Electron backscatter diffraction (EBSD) analysis showed that refinement of α-lamellae thickness by approximately 50% resulted in increased hardness, establishing a direct microstructure–property relationship. Electrochemical testing in simulated body fluids demonstrated excellent corrosion resistance and immunity to pitting, with improved corrosion potential observed in nearly defect-free material. These results demonstrate that micro-porosity and lamellar refinement govern the functional performance of directed energy deposited Ti-6Al-7Nb.

اللغة الأصليةالإنجليزيّة
رقم المقال190104
دوريةJournal of Alloys and Compounds
مستوى الصوت1079
المعرِّفات الرقمية للأشياء
حالة النشرنُشِر - 15 أغسطس 2026
منشور خارجيًانعم

بصمة

أدرس بدقة موضوعات البحث “Porosity, lamellar microstructure, and their effect on the mechanical and corrosion behavior of Ti-6Al-7Nb alloy produced by directed energy deposition'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا