TY - GEN
T1 - Design of semi-active battery-ultracapacitor hybrids
AU - Aharon, I.
AU - Kuperman, A.
PY - 2010
Y1 - 2010
N2 - A design approach to battery-ultracapacitor semiactive hybrids for powering wireless sensing nodes is presented in the manuscript. The hybrid source, which is an enhancement of a passive topology, consists of an ultracapacitor assisted Li-Ion battery, connected to the load via DC-DC converter. The system is controlled such that the DC-DC converter supplies a near-constant current to satisfy the average load demand while the ultracapacitor supplies the dynamic component of the load current. As a result, a high-energy battery can be used despite the load high-power demand spikes. In addition, the batteryload voltage matching is not required. It is shown that with the proposed control algorithm system performance is equivalent to the performance of a passive hybrid, employing a very high nonfeasible capacitance value. In addition, the battery current is independent of the capacitor size which affects only the load voltage ripple. Extended simulation results are presented to demonstrate the approach feasibility.
AB - A design approach to battery-ultracapacitor semiactive hybrids for powering wireless sensing nodes is presented in the manuscript. The hybrid source, which is an enhancement of a passive topology, consists of an ultracapacitor assisted Li-Ion battery, connected to the load via DC-DC converter. The system is controlled such that the DC-DC converter supplies a near-constant current to satisfy the average load demand while the ultracapacitor supplies the dynamic component of the load current. As a result, a high-energy battery can be used despite the load high-power demand spikes. In addition, the batteryload voltage matching is not required. It is shown that with the proposed control algorithm system performance is equivalent to the performance of a passive hybrid, employing a very high nonfeasible capacitance value. In addition, the battery current is independent of the capacitor size which affects only the load voltage ripple. Extended simulation results are presented to demonstrate the approach feasibility.
UR - http://www.scopus.com/inward/record.url?scp=78651232109&partnerID=8YFLogxK
U2 - 10.1109/EEEI.2010.5662148
DO - 10.1109/EEEI.2010.5662148
M3 - ???researchoutput.researchoutputtypes.contributiontobookanthology.conference???
AN - SCOPUS:78651232109
SN - 9781424486809
T3 - 2010 IEEE 26th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2010
SP - 593
EP - 597
BT - 2010 IEEE 26th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2010
T2 - 2010 IEEE 26th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2010
Y2 - 17 November 2010 through 20 November 2010
ER -