TY - JOUR
T1 - Architecture-controlled tearing in soft fibrous composites revealed by crack-tip kinematics
AU - Sharon, Smadar Elinor
AU - Portnov, Yana
AU - Aharonov, Adi
AU - Mordechai, Haim S.
AU - Maroz, Dekel
AU - Sharabi, Mirit
N1 - Publisher Copyright:
The Author(s) This is an open access article under the CC BY license. http://creativecommons.org/licenses/by/4.0/
PY - 2027/1
Y1 - 2027/1
N2 - Architectural design strongly influences how fibrous composites resist tearing in the presence of defects, yet the mechanisms linking fiber architecture to flaw tolerance under large deformation remain poorly understood. Here, we investigate architecture-controlled tearing in soft fibrous composites using silk fiber–reinforced hydrogel laminates with unidirectional, cross-plied, and angled-plied fiber configurations. Notched tensile experiments spanning a wide range of flaw sizes, combined with in situ crack tracking and crack-tip kinematic analysis, reveal distinct architecture-dependent tearing pathways during stable tearing. While conventional bulk failure metrics show limited sensitivity to architectural differences, crack-tip kinematics expose systematic coupling between apparent crack extension, crack-tip opening displacement (CTOD), and crack-tip opening angle (CTOA). Unidirectional laminates maintain stable tearing even at extreme flaw sizes, whereas cross-plied and angled-plied laminates become progressively flaw-sensitive under increasing geometric confinement. Despite these distinct tearing pathways, CTOD–CTOA trajectories converge toward a constrained crack-opening geometry during stable tearing.These findings show that fiber architecture governs the kinematic pathway to fracture, while stable tearing evolves toward a reproducible geometry-based crack-tip state. This framework establishes crack-tip kinematics as a physically meaningful descriptor of tearing in highly deformable fibrous composites and identifies fiber architecture as a governing design strategy for controlling fracture pathways and flaw tolerance.
AB - Architectural design strongly influences how fibrous composites resist tearing in the presence of defects, yet the mechanisms linking fiber architecture to flaw tolerance under large deformation remain poorly understood. Here, we investigate architecture-controlled tearing in soft fibrous composites using silk fiber–reinforced hydrogel laminates with unidirectional, cross-plied, and angled-plied fiber configurations. Notched tensile experiments spanning a wide range of flaw sizes, combined with in situ crack tracking and crack-tip kinematic analysis, reveal distinct architecture-dependent tearing pathways during stable tearing. While conventional bulk failure metrics show limited sensitivity to architectural differences, crack-tip kinematics expose systematic coupling between apparent crack extension, crack-tip opening displacement (CTOD), and crack-tip opening angle (CTOA). Unidirectional laminates maintain stable tearing even at extreme flaw sizes, whereas cross-plied and angled-plied laminates become progressively flaw-sensitive under increasing geometric confinement. Despite these distinct tearing pathways, CTOD–CTOA trajectories converge toward a constrained crack-opening geometry during stable tearing.These findings show that fiber architecture governs the kinematic pathway to fracture, while stable tearing evolves toward a reproducible geometry-based crack-tip state. This framework establishes crack-tip kinematics as a physically meaningful descriptor of tearing in highly deformable fibrous composites and identifies fiber architecture as a governing design strategy for controlling fracture pathways and flaw tolerance.
KW - Composite laminates
KW - Crack-tip kinematics
KW - Fiber architecture
KW - Flaw tolerance
KW - Large-deformation fracture
KW - Soft fibrous composites
KW - Tearing mechanics
UR - https://www.scopus.com/pages/publications/105054022353
U2 - 10.1016/j.mechmat.2026.105901
DO - 10.1016/j.mechmat.2026.105901
M3 - ???researchoutput.researchoutputtypes.contributiontojournal.article???
AN - SCOPUS:105054022353
SN - 0167-6636
VL - 224
JO - Mechanics of Materials
JF - Mechanics of Materials
M1 - 105901
ER -