A design method for two-layer beams consisting of normal and fibered high strength concrete

نتاج البحث: نشر في مجلةمقالةمراجعة النظراء

67 اقتباسات (Scopus)

ملخص

Two-layer fibered concrete beams can be analyzed using conventional methods for composite elements. The compressed zone of such beam section is made of high strength concrete (HSC), and the tensile one of normal strength concrete (NSC). The problems related to such type of beams are revealed and studied. An appropriate depth of each layer is prescribed. Compatibility conditions between HSC and NSC layers are found. It is based on the shear deformations equality on the layers border in a section with maximal depth of the compression zone. For the first time a rigorous definition of HSC is given using a comparative analysis of deformability and strength characteristics of different concrete classes. According to this definition, HSC has no download branch in the stress-strain diagram, the stress-strain function has minimum exponent, the ductility parameter is minimal and the concrete tensile strength remains constant with an increase in concrete compression strength. The application fields of two-layer concrete beams based on different static schemes and load conditions make known. It is known that the main disadvantage of HSCs is their low ductility. In order to overcome this problem, fibers are added to the HSC layer. Influence of different fiber volume ratios on structural ductility is discussed. An upper limit of the required fibers volume ratio is found based on compatibility equation of transverse tensile concrete deformations and deformations of fibers.

اللغة الأصليةالإنجليزيّة
الصفحات (من إلى)1672-1677
عدد الصفحات6
دوريةMaterials and Design
مستوى الصوت28
رقم الإصدار5
المعرِّفات الرقمية للأشياء
حالة النشرنُشِر - 2007

بصمة

أدرس بدقة موضوعات البحث “A design method for two-layer beams consisting of normal and fibered high strength concrete'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا